Designed groove for adjust the position to work easily.
To push down the wishbone and other suspension parts, e.g. during
the disassembly of the drive shaft , during replacing the gaiter or
exchange of the wheel bearing. After loosening the ball joint the
wishbone must in most cases be pushed down against the bush or
stabilizer tension, in order to pull the joint from the support.
With this lever tool the work can comfortably and surely be
accomplished by one person.

1318 JTC-7716 4MM小型可彎吸棒
1914 JTC-34510 12角凸頭套筒-M10
1258 JTC-5648 10米電源輪座
2317 JTC-5526 6PCS 歐式精密起子組



